EXCEL ETM 2VS

Year2020ManufacturerEXCELCategoryVertical MillsConditionUsedLocationUnited Kingdom
Ref108

Description

Overview

Supplied by the seller

Ex College 2020 Excel ETM 2VS Variable Speed Turret Milling Machine, R8 Spindle Taper, 65 to 4,500rpm Spindle Speeds, 1,246 x 230mm Table, 790mm Longitudinal Travel, 310mm Cross Travel, 390mm Knee Travel, 127mm Quill Travel, 3-Axis DRO, Power Feed to Quill, Servo-Type Table Feeds, One-Shot Lubrication, Coolant System, Electrically Interlocked Spindle Guard and Low-Voltage Machine Light.

Specifications

Manufacturer
EXCEL
Year
2020
Weight
1,160 kg
Dimensions
86.61 x 63.00 x 78.74
Table Size-W
230 mm
Table Size-L
1,246 mm
Power
2.2 kW
Model
ETM 2VS
Machine type
Variable speed turret milling machine
Electrical connection
400V, 3ph, 50Hz
View full spec sheetHide full spec sheet
Spindle motor
2.2kW / 3HP
Coolant pump
90W
Spindle taper
R8
Spindle speeds
65 to 4,500rpm
Table size
1,246 x 230mm
T-slots
16mm / 3 slots
Longitudinal table travel
790mm, reduced to approx. 690mm with feed/DRO
Cross saddle travel
310mm, reduced to approx. 270mm with feed/DRO
Knee vertical travel
390mm
Quill travel
127mm
Ram travel
312mm
Quill power feeds
0.04 / 0.08 / 0.15mm/rev
Spindle nose to table
0 to 405mm
Spindle to column
90 to 450mm
Head tilt left/right
±90°
Head tilt front/back
±45°
Approx. dimensions
220 x 160 x 200cm
  • The core technical data above is taken from Excel’s ETM 2VS specification sheet and distributor specifications, including the 400V 3-phase supply, 2.2kW/3HP motor, R8 spindle, 65 to 4,500rpm spindle speed range, 1,246 x 230mm table, 127mm quill travel and 1,160kg machine weight.
  • Feeds
Feed
Detail
X-axis longitudinal feed
Infinitely variable, 0 to 740mm/min
Y-axis cross feed
Infinitely variable, 0 to 730mm/min
Z-axis knee feed
Variable, 0 to 280mm/min
Quill feed
3 rates, 0.04 / 0.08 / 0.15mm/rev
  • The ETM 2VS is listed with servo-type longitudinal, cross and vertical feed with rapid traverse, plus 3-rate power feed to the quill.
  • Standard Equipment / Features
  • 3-axis digital readout
  • R8 spindle taper
  • Variable spindle speed
  • Power feed to quill, 3 rates
  • Servo-type longitudinal, cross and vertical feed
  • Rapid traverse
  • One-shot lubrication
  • Coolant system
  • Electrically interlocked spindle guard
  • Low-voltage machine light
  • Hardened slideways
  • Reversible spindle switch
  • Adjustable depth stop
  • Large base tray
  • Excel lists the ETM 2VS with one-shot lubrication, coolant system, electrically interlocked spindle guard, low-voltage machine light and 3-axis DRO as standard equipment.

As supplied by the seller. Figures are converted between systems where a unit applies; anything without one is shown as quoted.

Enquire

Ask about this machine

It reaches the team that handles this machine, and whoever answers has seen it.

Charter does far more than sell machines.
Find out how we support businesses all year round.