EXCEL ETM 2VS Variable Speed Turret Milling Machine

Main Specification

Specification Detail

Manufacturer Excel Machine Tools

Model ETM 2VS

Year 2020

Machine type Variable speed turret milling machine

Electrical connection 400V, 3ph, 50Hz

Spindle motor 2.2kW / 3HP

Coolant pump 90W

Spindle taper R8

Spindle speeds 65 to 4,500rpm

Table size 1,246 x 230mm

T-slots 16mm / 3 slots

Longitudinal table travel 790mm, reduced to approx. 690mm with feed/DRO

Cross saddle travel 310mm, reduced to approx. 270mm with feed/DRO

Knee vertical travel 390mm

Quill travel 127mm

Ram travel 312mm

Quill power feeds 0.04 / 0.08 / 0.15mm/rev

Spindle nose to table 0 to 405mm

Spindle to column 90 to 450mm

Head tilt left/right ±90°

Head tilt front/back ±45°

Approx. dimensions 220 x 160 x 200cm

Approx. weight 1,160kg

The core technical data above is taken from Excel’s ETM 2VS specification sheet and distributor specifications, including the 400V 3-phase supply, 2.2kW/3HP motor, R8 spindle, 65 to 4,500rpm spindle speed range, 1,246 x 230mm table, 127mm quill travel and 1,160kg machine weight.

Feeds

Feed Detail

X-axis longitudinal feed Infinitely variable, 0 to 740mm/min

Y-axis cross feed Infinitely variable, 0 to 730mm/min

Z-axis knee feed Variable, 0 to 280mm/min

Quill feed 3 rates, 0.04 / 0.08 / 0.15mm/rev

The ETM 2VS is listed with servo-type longitudinal, cross and vertical feed with rapid traverse, plus 3-rate power feed to the quill.

Standard Equipment / Features

3-axis digital readout

R8 spindle taper

Variable spindle speed

Power feed to quill, 3 rates

Servo-type longitudinal, cross and vertical feed

Rapid traverse

One-shot lubrication

Coolant system

Electrically interlocked spindle guard

Low-voltage machine light

Hardened slideways

Reversible spindle switch

Adjustable depth stop

Large base tray

Excel lists the ETM 2VS with one-shot lubrication, coolant system, electrically interlocked spindle guard, low-voltage machine light and 3-axis DRO as standard equipment.